Spain Power Electronics

Lliria, Valencia, Spain

Spain Power Electronics
©2020 Aitor Ortiz

The building is located in the industrial park of Carrases in Llíria, at a tangent to the Ademuz highway that connects Liria with Valencia. It is a large 50,650 m2 production facility, a visible white metal structure, which creates an open, clean and flexible interior space to adapt internal logistics to production and storage needs.

Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz

On one side of the warehouse, the one closest to the highway, are the company’s offices, divided into two large blocks called technological and corporate.

Spain Power Electronics
©2020 Aitor Ortiz

The technological block occupies the entire side of the production facility, about 240 meters long, housing engineering, laboratories and R&D areas that need to be in permanent contact with production.

Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz

The corporate block is detached and at an angle to run parallel to the highway. Both blocks are joined by a triple-height volume where the main staircase of the building is placed, suspended in the void.

Spain Power Electronics Drawing
©2017 IDOM
Spain Power Electronics
©2020 Aitor Ortiz

The space between both blocks becomes an interior patio where the uses can rest or interact outdoors while being protected from the sun.

Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz

On the facades, a neutral colored metal panel is used as the main element, forming large overhangs that protect from the southwestern sun, generating the image of the building stretching towards the highway.

Spain Power Electronics
©2020 Aitor Ortiz

The use of wood in the corporate area creates an interior which is warm and elegant.

Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz
Spain Power Electronics
©2020 Aitor Ortiz

项目图纸

Spain Power Electronics Drawing
site plan ©2017 IDOM
Spain Power Electronics Drawing
floor plan ©2017 IDOM
Spain Power Electronics Drawing
section plan ©2017 IDOM

项目信息

LocationLLÍRIA, Valencia
DeveloperPOWER ELECTRONICS
OfficeIDOM
Architects authors of the ProjectCésar Aitor Azcárate Gómez 、Vicent Ribes Vidal
Management of the Project WorksPedro Garcia Torres
Management and Coordination of the Project and WorkDavid Giner Sanchis
Management of Execution of WorksGrupo Bertolín 、Eiffage Energia、Elecnor、Inserman
Construction91,400 m2 (site)
67,000 m2 (built area)
Budget40 million euros
Start date of the worksJuly 2017
End Date of the WorksAugust 2020
PhotographyAitor Ortiz

Leave a comment