Lima Convention Centre

San Borja, Peru

LCC ©2016 Aitor Ortiz
LCC ©2016 Aitor Ortiz

The project and construction of the Lima Convention Centre (LCC) is contextualized by the agreement between the Peruvian State and the World Bank and the International Monetary Fund to hold in Lima the 2015 Board of Governors.

Building entrance ©2016 Aitor Ortiz
Building entrance ©2016 Aitor Ortiz

Strategically located in the Cultural Centre of the Nation (CCN) – next to the National Museum, the Ministry of Education, the new headquarters of the National Bank or the Huaca San Borja – the design of the LCC was to satisfy four strategic objectives: being a cultural and economic motor for the country, representing a meeting place at the heart of the city enrooted in the collective Peruvian culture, turning into a unique, flexible and technologically advanced architectonic landmark and finally, triggering the urban transformation of the CNN and its surroundings.

Interior Perspective ©2016 Aitor Ortiz
Interior Perspective ©2016 Aitor Ortiz

The near 15,000 m2 of net area correspond to the 18 multipurpose convention halls, their sizes and proportions varying from 3,500 m2 to 100 m2, which allow for up to 10,000 people to attend simultaneous events. The rest of the programme is completed by four underground car-park floors as well as several uses above ground that complement the conference rooms. These would include areas for translation and general management of the centre, stockrooms and toilets, workshops and areas for maintenance and material distribution, kitchens and dining areas, exhibition halls, cafeterias and relaxation areas. This all generates a total built up area of 86,000 m2.

Street View ©2016 Aitor Ortiz
Street View ©2016 Aitor Ortiz

The urban proposal situates the access to the building on the north end, therefore encouraging the future development of the Culture Boulevard. The general volume is organized into three time-physical strata clearly differentiated, symbolically related to the country’s history, time and memory:

Close-up of the facade ©2016 Aitor Ortiz
Close-up of the facade ©2016 Aitor Ortiz

The present is represented by the great internal void – Nation Rooms – which harbours the two transformable rooms of about 1,800 m2, one of which can open up entirely to the city by clearing its perimeter of the acoustics panels that make it up, generating a sheltered urban plaza over 2,500 m2.

Nation Rooms ©2016 Aitor Ortiz
Nation Rooms ©2016 Aitor Ortiz

The past, the heart of the project, is an outdoor area inspired by a great huaca – Lima Lounge – generated naturally by the disposition and the difference in height of the convention halls.

Section ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM

The future is a great vitreous volume – International Room of Nations. It’s a highly technical conventions facility which invites the rest of the world to come to Peru for its entrepreneurial capacity and its promising future.

The operative and functional flexibility are keys to the comprehensive design of the LCC and are orientated towards maximizing the economic and social success of the project. Nearly all rooms can be extended or reduced thanks to the acoustic panels that limit them, making it possible to have several spatial distributions.

Atrium View ©2016 Aitor Ortiz
Atrium View ©2016 Aitor Ortiz

Technically, the mandatory condition by which the great 5,400 m2 room, with capacity for 3,500 people, was to be free from pillars – along with the seismic inconvenience of using propped up structures –, turns the conceptual and structural proposal into a challenge, since it implies putting the great room on the last level. Placing a sheltered volume the size of a football pitch at a height of over 30 m is a challenge to both the structural approach and the building’s internal mobility – access and evacuation.

Street View ©2016 Aitor Ortiz
Street View ©2016 Aitor Ortiz

Project drawings

1F ©2016 IDOM
1F ©2016 IDOM
5F ©2016 IDOM
5F ©2016 IDOM
9F ©2016 IDOM
9F ©2016 IDOM
-4F ©2016 IDOM
-4F ©2016 IDOM
South elevation ©2016 IDOM
South elevation ©2016 IDOM
2F ©2016 IDOM
2F ©2016 IDOM
6F ©2016 IDOM
6F ©2016 IDOM
-1F ©2016 IDOM
-1F ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
West elevation ©2016 IDOM
West elevation ©2016 IDOM
3F ©2016 IDOM
3F ©2016 IDOM
7F ©2016 IDOM
7F ©2016 IDOM
-2F ©2016 IDOM
-2F ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
North elevation ©2016 IDOM
North elevation ©2016 IDOM
4F ©2016 IDOM
4F ©2016 IDOM
8F ©2016 IDOM
8F ©2016 IDOM
-3F ©2016 IDOM
-3F ©2016 IDOM
Section ©2016 IDOM
Section ©2016 IDOM
East elevation ©2016 IDOM
East elevation ©2016 IDOM

Project information

ArchitectsIDOM
Area86000 m²
Year2016
PhotographsAitor Ortiz
ManufacturersBTicino, INDOBE, Instaplac, Modernfold, SAK, Sika, Teisa, Técnicas metálicas
Project TeamMaría Cortés Monforte, Jorge Rodríguez, Alejandra Muelas, Enrique Alonso, Adrián Jabonero, Roberto Moraga, Armide González, Nazaret Gutiérrez, María Amparo González, Lucía Chamorro, Jesús Barranco, Magdalena Ostornol, DESSIN-TECHNISCH, Borja Gómez, Pablo Viña, Luis Valverde
Team Coordinator MadridAlejandro Puerta, Carmen Camarmo,
StructuresAlejandro Bernabéu, Javier Gómez, Mónica Latorre
Hvac EngineeringAntonio Villanueva, Ramón Gutiérrez, Mariano Traver, Celia Monge (SOLVENTA)
LightingNoemi Barbero
Public Health EngineeringRamón Gutiérrez, Mariano Traver, Javier Martínez (SOLVENTA)
Electrical EngineeringJosé Antonio Yubero, Luis Martín, Carlos Jiménez, José Manuel Jorge, Javier Martínez (SOLVENTA)
Ict EngineeringJosé Antonio Yubero, José Manuel Jorge, Carlos Jiménez, Luis Martín, Javier Martínez (SOLVENTA)
AcousticsMario Torices
CadÓscar Martín Corpa, Carlos Mendoza, Alexander Chic, Sergio Lozana
AdministrationBanesa Marrero Castro
ConstructorOAS
CitySan Borja
CountryPeru

Editing and translation: @Ibo, ©️FULLDES authorized publishing, copyright from the Author, Image copyright from the photographer or Company

Leave a comment